Foam Blaster 6 Foam Wash Gun

Foam Blaster 6 Foam Wash Gun

Regular price
$125.99
Regular price
$169.99
Sale price
$125.99
Unit price
per 
Availability
Sold out

TORQ Foam Blaster 6 Foam Wash Gun - The Ultimate Car Wash Foamer That Connects to Any Hose

 

Why Buy This Product?

  • High quality car wash foam gun
  • Sprays soapy car wash foam
  • No pressure washer required
  • Works with any standard garden hose
  • Solid corrosion-resistant construction
  • Quick release fitting turns normal nozzle into foam gun
  • Brass and aluminum parts do not rust or corrode
  • Quality plastics resist cracking and fading from exposure
  • Works with any premium Chemical Guys car wash soap
  • Remove the thickest dirt and mud from any vehicle
  • Also available as a 4 item or 7 item kit

About The TORQ Foam Blaster 6

Turn every car wash into a fun foam party with the TORQ Foam Blaster Foam Gun! Bored with the same car wash routine? Lack of suds and bubbles leaving your finish flat and tired? Add intense foam action to clean paint and add heaps of fun to the process! Improper car washing pushes dirt around and scratches paint. Slick car wash soap and foaming bubbles help loosen, lubricate, and float abrasive dirt away from paintwork for a gentler and safer cleaning experience. The TORQ Foam Blaster mixes car wash soap with air and running water to create foamy car wash suds. Cover the car with slick suds to break down stuck-on dirt, grease, and grime from exterior car parts. Continue on with a normal 2-bucket car wash method and microfiber wash mitt. For extra-sensitive paint finishes, spray the Foam Blaster directly into the wash mitt with every wipe to add extra lubrication. Spray down paintwork, wheels, undercarriages, exhaust systems, and even engine bays with soapy cleaning suds at the start of every car wash with the TORQ Foam Blaster Foam Gun.


How It Works

Car wash foam is one of the professional’s secrets to a scratch-free car wash. The TORQ Foam Blaster Foam Gun turns a car wash into a foam bubble bath for your car. Bathing a car with slick car wash foam removes abrasive dirt particles gently and without grinding them into paintwork. Over 95% of swirls and scratches come from improper car washing and drying techniques and products. Adding slick car wash foam to the equation drastically reduces the risk of installing swirls and scratches on painted surfaces. While professional detailers invest in expensive pressure washers and filtration systems to use powerful foam cannons, the car detailing enthusiast can achieve much of the effect with only a standard garden hose and the TORQ Foam Blaster Foam Gun. The TORQ Foam Blaster mixes the perfect amount of car wash soap with water and air to create thick soapy foam to gently clean any vehicle. The versatile TORQ Foam Blaster Foam Gun can be used with any premium Chemical Guys car wash soap. Simply fill the bottle with water and add 1 - 3 ounces of your favorite car wash shampoo for a foamy car wash experience. When it comes time for the final rinse, unclip the foam bottle with the quick release fitting and spray the car down with the sprayer nozzle. Choose the TORQ Foam Blaster Foam Gun for professional detailing results with only enthusiast investment.




Adjustable Foam Concentration

The TORQ Foam Blaster Foam Gun combines the soapy water solution with air and running water to spray foam over your car. How dirty is your car? Very dirty? Not very dirty? Save soap and water by picking the perfect concentration with the adjustable TORQ Foam Blaster Foam Gun. Simply turn the dial to adjust the dilution ratio of the soapy foam sprayed from the nozzle. The soap solution bottle holds 32 oz. of liquid. Fill with plain water, then add 1 - 3 oz. of your favorite Chemical Guys car wash soap to suit the level and type of dirt on the vehicle. Light dust and road grime on the paintwork? Use just 1 ounce. Thick mud and bugs stuck all over the car? Try adding 3 ounces of soap. Start spraying the foam gun and turn the adjustable knob to the perfect thickness of soapy foam suds. The TORQ Foam Blaster Foam Gun is the versatile car wash tool for every detailing need. 

Turn adjustable knob to produce desired foam thickness

  • 0: 10:1 11.6oz/gallon
  • 1: 20:1 6.1oz/gallon
  • 2: 30:1 4.1oz/gallon
  • 3: 40:1 3.1oz/gallon
  • 4: 100:1 1.3oz/gallon
  • 5: 300:1 0.4oz/gallon


Use For A Scratchless Wash Experience

Over 95% of swirls and scratches come from using improper washing and drying techniques and products. Good quality car wash soaps lubricate dirt and reduce the chances of scratching paintwork. The Foam Blaster 6 adds extra protection against scratches by lifting and guiding abrasive dirt and debris off paintwork with slick car wash foam. Use the Foam Blaster 6 along with the two-bucket method to ensure the lowest chances of scratching sensitive automotive paintwork. The Foam Blaster 6 works with any premium Chemical Guys car wash soap. Simply fill the tank with clean water, and add 1 - 3 ounces of your favorite Chemical Guys soap. Rinse away loose debris and saturate heavier dirt with the black sprayer nozzle, then attach the foam gun via the easy-to-use quick release coupler. Saturate the vehicle from top to bottom with the car wash foam to loosen abrasive dirt and guide it gently away without even touching the vehicle with the wash mitt. Allow the soap to dwell for up to five minutes, then wash the car as normal with the two bucket method. Detach the foam gun from the sprayer nozzle and rinse any remaining dirt and soap from the vehicle. Proper methods and products like the Foam Blaster 6 help to reduce the chances of scratching any vehicle during the weekly wash.



Complete Rinse And Foam Nozzle System

The TORQ Foam Blaster Foam Gun comes in a complete two-piece system. Easily rinse dirt, grime, and debris from the car using the rugged nozzle. The quality aluminum and brass nozzle attaches to any standard garden hose and sprays a steady stream with a light squeeze of the handle. Save water when it’s not needed! The nozzle stops water flow when it’s not in use, and saves thousands of gallons of water over just a few car washes. The TORQ Foam Blaster Foam Gun snaps into the front of the nozzle via a quick release ring. Simply snap the ring back to slide the foam gun on the nozzle, and you’re ready to foam any car! At the end of the foaming and bucket wash, snap the foam gun off and rinse down the car for a show car finish. The Foam Blaster also ships with a quick-release adapter to attach the nozzle to any garden hose shut-off valve. Gardening and home improvement enthusiasts know and love quick release attachments to save time when switching between nozzles and watering wands. Not ready to use a quick release? Unscrew the included adapter and attach the nozzle directly to your garden hose. Save the adapter in the garage until you’re ready to start using a quick release system for faster hose nozzle switches later on! High quality plastics, aluminum, and brass components will not rust, corrode, or seize from regular and normal use washing any car, or for normal watering and housework with the garden hose. Choose the TORQ Foam Blaster Foam Gun for ease of use, superior performance, and high grade construction that won’t let you down.


Upgraded Internals Produce More Foam

TORQ engineers tweaked the Foam Blaster Foam Gun to produce thicker foam with less soap. Refined internal components smooth out the water and air stream, blending more air with soap drawn from the solution bottle. TORQ engineers also took a look at the nozzle and upgraded all moving handle parts with sturdier pieces that resist corrosion. Improved lubricants and updated hinge pieces ensure smooth operation and nozzle action for the lifetime of the Foam Blaster. The TORQ Foam Blaster Foam Gun is the sound investment for any professional or enthusiast detailer looking for the safest car wash, week after week.



Dilution Ratio

Fill soap solution bottle with water and add 1 - 3 ounces of your favorite Chemical Guys car wash soap. Turn adjustable knob to produce desired foam thickness.

More Product Videos

  
How To Use:
Directions
  • Fill soap solution bottle with fresh water
  • Add 1 - 3 oz of your favorite Chemical Guys car wash soap
  • Rinse car with water to remove loose debris and grime
  • Attach TORQ Foam Blaster Foam Gun to the quick release nozzle
  • Cover car with soapy car wash foam to lift and lubricate stuck-on dirt from the surface
  • Proceed with 2-bucket car wash method to gently remove any dirt without installing any swirls or scratches
  • Spray foam directly into wash mitt with every wipe for maximum lubrication
  • Rinse car clean and dry with premium microfiber towels
Maintaining The TORQ Foam Blaster Foam Gun
  • Rinse soap solution bottle clean with fresh water
  • Run plain water through the foam gun to purge detergent and soap from the internal components
  • Cycle with warm or hot water to break down thick soap residues
  • Unscrew soap solution bottle and allow to air dry, then reattach before storing
  • Store the TORQ Foam Blaster Foam Gun in a cool dry place out of direct sunlight