Cyclone Dirt Trap-Car Wash Bucket Insert
Cyclone Dirt Trap-Car Wash Bucket Insert
Cyclone Dirt Trap-Car Wash Bucket Insert
Cyclone Dirt Trap-Car Wash Bucket Insert
Cyclone Dirt Trap-Car Wash Bucket Insert
Cyclone Dirt Trap-Car Wash Bucket Insert

Cyclone Dirt Trap-Car Wash Bucket Insert

Regular price
$31.99
Regular price
$42.99
Sale price
$31.99
Unit price
per 
Availability
Sold out

The Cyclone Dirt Trap is a car wash filter that uses nearly 300 cyclonic funnels to trap dirty wash water under the filter and keep abrasive particles off your mitt for the perfect scratch-free wash.

Use This To: 

  • Protect your vehicle's delicate finish
  • Keep your water clean as you wash
  • Capture spent dirt at the bottom of your bucket
  • Keep removed dirt from getting back on your car
  • Reduce chances of marring paintwork when washing

Uni-Directional Filtration Technology

The Dirt Trap keeps abrasive particles at the bottom of your wash bucket to reduce scratches and swirls caused. Old world wash screens allow water and dirt to flow through vertically. The textured underside and small holes of the Dirt Trap screen act as a one-way valve: dirt is pushed through the cyclone funnels and is trapped underneath the guard where it cannot flow back into the clean water.

Ridged Design Delivers The Ultimate Clean

Every Dirt Trap is molded with Cyclone Scrub Ridge rings around every dirt cyclone funnel. Rub the wash mitt directly on the Dirt Trap to scrub and agitate any embedded dirt and grime from the wash fibers, then funnel and trap it directly underneath the insert. Adding the Dirt Trap to the two bucket method reduces the chances of installing any swirls or scratches during a normal wash dramatically.

 

 

 
How To Use:
  1. Use the two bucket method to reduce swirls and scratches with every car wash
  2. Fill each bucket with 4 - 5 gallons of clean water
  3. Press the Dirt Trap firmly into the bucket until it sits flush and snugly at the bottom
  4. Add 1 - 3 ounces of your favorite Chemical Guys car wash soap in the wash bucket
  5. Rinse car well to remove large particles and loose debris
  6. Dunk car wash mitt into the soap solution bucket, then wash the vehicle top to bottom one panel at a time
  7. Dunk the dirty mitt in the rinse bucket and scrub directly onto the Cyclone Scrub Ridges to agitate dirt from the mitt
  8. Wring mitt out on the ground to flush out any loose dirt
  9. Dunk mitt back in soap bucket and continue to wash car
  10. Rinse off both sides of Dirt Trap and store in cool dry place between uses